Home / Services / Industrial Safety
Factories Act 1948 & DISH Maharashtra Certified
Statutory Industrial Safety Advisory

Factory Plan Approvals, Safety Audits & Zero-Incident Compliance

Comprehensive statutory coverage governed by the Directorate of Industrial Safety & Health (DISH). We protect manufacturing plants, chemical hubs, and corporate directors through rigorous IS 14489 safety audits, Section 6 architectural sanctions, and turnkey compliance documentation.

1,450+
DISH Sanctions Issued
100%
Audit Defense Success
24 Hrs
Emergency Dispatch
Safety auditor inspecting industrial pressure vessels and instrumentation
IS 14489 Standardized
Continuous HIRA, HAZOP & Electrical Audits across Maharashtra MIDC
DISH Enforcement Framework

Priority 2 — Safety & Training Action Directive

Strict regulatory enforcement mandates from DISH Maharashtra. Failure to execute scheduled emergency drills or document machine guarding risks stop-work notices and director summons.

01

Evacuation & Fire Drills

Conduct bi-annual fire drills and shift-wise evacuation trials. We document roll-call headcount logs, warden response speeds, and photographic evidence for statutory files.

Mandatory Every 6 Months
02

SOP Implementation Across Shifts

Standard Operating Procedures (SOPs) translated into vernacular languages (Marathi, Hindi). Strict Lock Out / Tag Out (LOTO) procedures installed on all primary switchgears.

Continuous Tri-Shift Guarding
03

Incident Log & Form 21 Pre-Audits

Maintenance of dangerous occurrences, near-miss ledgers, and formal Form 21 filings within 4 hours of any incident, insulating corporate management from vicarious liability.

100% Director Indemnification
End-to-End Execution

Six Pillars of Industrial Plant Safety

From initial civil architectural layouts to daily shopfloor machinery certifications under the Maharashtra Factories Rules 1963.

DISH & MIDC Accredited

1. Factory Plan Approval

Section 6, Factories Act 1948

Full architectural vetting, structural stability endorsements (Form 1A), layout clearance for machinery spacing, ventilation, and fire-escape corridors approved by Joint Director DISH.

  • Form 1 Civil Drawing Vetting
  • Machinery & Chemical Storage Layouts
  • Emergency Egress Calculations

2. Registration & Licence Renewal

Form 2 Filing & Capacity Expansion

End-to-end processing of Form 2 submissions for newly commissioned factories, annual renewals, and statutory amendments necessitated by changes in connected horsepower (HP) or workforce.

  • Multi-Year License Renewals (Up to 10 Yrs)
  • Power (HP) & Worker Slab Re-classification
  • Change of Occupier / Director Records

3. Safety Audits, HIRA & HAZOP

IS 14489 Standard Comprehensive Auditing

Comprehensive workplace risk identification via Job Safety Analysis (JSA), Hazard Identification & Risk Assessment (HIRA), and HAZOP studies for Major Accident Hazards facilities.

  • On-Site Emergency Plans (OEP) Preparation
  • Quantitative Risk Assessments (QRA)
  • Machine Guarding & Interlock Verification

4. Fire & Electrical Inspections

Form B & Thermography Certification

Licensed agency Form B bi-annual fire compliance certification, earth pit resistance testing, infrared electrical thermography on switchboards, and hydrant pump pressure verification.

  • Certified Infrared Thermographic Surveys
  • Earth Pit Testing (< 1 Ohm Standard)
  • Maharashtra Fire Services Form B Issuance

5. Statutory Documentation & SOPs

Mandatory Registers & Committee Minutes

Systematic documentation of quarterly Safety Committee meetings, dangerous occurrence registers, safety policy formulation under Section 7A, and mock drill records for DISH inspections.

  • Bilingual Safety Manuals & Handbooks
  • Quarterly Safety Committee Charters
  • Accident Investigation & CAPA Filings

6. Worker & Supervisor Safety Training

Classroom & Practical Shopfloor Modules

Certified technical safety trainings including Lock Out / Tag Out (LOTO), Confined Space Entry, Work at Height, Overhead Crane Operation, Chemical Spill Response, and Certified First Aid.

  • Competent Person Training Certifications
  • Digital Attendance & Skill Competency Logs
  • St. John Ambulance Certified First Aid
Thermal hotspot scanning and plant safety telemetry audit
ELECTRICAL & PROCESS SAFETY
Thermal Hotspot Scanning & Live Drills
Emergency Preparedness DrillsFull DISH 14489:2018 & NDMA certified timing
Book Audit
Procedural Rigor

The Vision Tech IS 14489 Audit Protocol

Our certified lead auditors deploy a four-tier evaluation methodology designed to satisfy state factory inspectors while unearthing hidden operational liabilities.

01
Documentary VerificationValidation of Form 1A certificates, pressure vessel test records (Form 11), lifting tackle registers (Form 10), and statutory committee minutes.
02
Shopfloor Physical WalkthroughPhysical inspection of interlocks, perimeter guards, emergency stop pull-wires, ventilation ducts, chemical secondary containment, and PPE adherence.
03
Engineering Testing & MeasurementLux meter illuminance checks, decibel sound-level mapping, earth pit resistance testing, and thermographic scans across electrical panels.
04
Comprehensive CAPA & DISH SubmissionDelivery of categorized photographic non-conformance reports, executive CAPA plans, and regulatory endorsement files.
Statutory Clarifications

Frequently Asked Compliance Questions

Under Section 6 of the Factories Act 1948 read with Rule 3 of the Maharashtra Factories Rules 1963, no construction, reconstruction, or extension of any factory premises can begin without prior approval from the Chief Inspector of Factories (DISH). Submission requires Form 1 signed by Occupier & Architect, architectural layout plans showing site boundaries, machinery placements, escape pathways, clear headroom (min 4.2m), window ventilation (at least 15% of floor space), process flowcharts, and Form 1A Structural Stability certification.

Form 1A Stability certificates issued by a DISH-recognized Competent Person are mandatory prior to factory commencement, after any structural expansion or addition of heavy machinery, and periodically every 5 years (or earlier if directed by DISH).

Triggers include random computerized risk-based inspection rosters, Form 2 license amendment applications (horsepower or headcount increases), Form 21 reportable incident filings, employee/union complaints, or overdue statutory safety audit submissions for hazardous processes.

Under Section 7A and Section 92 of the Factories Act, the Occupier (Director) carries strict statutory duty of care. Documented HIRA/HAZOP studies, engineering safeguards, and signed training logs establish due diligence and prevent prosecution under Section 92/96A.

Key filings include the updated Form 2 application, approved DISH layout plan copy, Form 1A Stability certificate, valid MPCB Consent to Operate, connected horsepower & worker slab declarations, Board Resolution nominating the Occupier, and treasury fee challan.

Under the Maharashtra Fire Prevention and Life Safety Measures Act, Form B is a mandatory bi-annual certificate (filed every January and July) issued by a licensed agency confirming all fire hydrants, sprinklers, extinguishers, and electrical safety systems are fully operational.

Ready for Zero-Observation DISH & Factory Inspections?

Schedule a scoping consultation with our DISH & IS 14489 safety engineering team today.